LINK-PP Official
Posts
Popular article
Through‑Hole Reflow Soldering enables simultaneous soldering of through-hole and surface-mount components in a single efficient reflow process.
Learn what an SFP link is, why it fails, and how to fix compatibility, cabling, and link-flap issues with practical checks and clear steps.
Through‑Hole Reflow Soldering enables simultaneous soldering of through-hole and surface-mount components in a single efficient reflow process.
Discover the LQ‑SW40‑SR4C 40GBASE‑SR module: high-speed, low-power, QSFP+ optics for multimode fibre networks. Perfect for data centres and network upgrades.
Learn what Direct Attach Cables are, how they work, their advantages over fiber optics & AOCs, common types, and why they dominate short-reach data center links
DAC vs AOC differences: DAC suits short, low-cost links; AOC excels in long-distance, EMI-prone networks. Choose the right cable for your needs.
RFI Radio Frequency Interference is unwanted radio signals that disrupt electronic devices, causing performance issues and communication problems.
Turns ratio in LAN transformers defines the winding relationship, typically 1:1, ensuring signal integrity, voltage stability, and Ethernet compliance.
Compare QSFP28 100G SR4 vs LR4 to choose the right 100G transceiver for your network based on distance, fiber type, connectors, and budget.
SFP vs GBIC: Compare size, speed, compatibility, and cost to choose the best module for your 2025 network. See why SFP is preferred for new setups.
What RoHS certification means, which substances are restricted, and why compliance matters for electronic manufacturers and importers.
Explore the LINK-PP LS-MM8510-S3C SFP+ 850nm 10GBASE-SR optical transceiver. Up to 300m reach on MMF with low power consumption and full compatibility.
A 100G LR4 transceiver enables 100Gbps data transfer up to 10km using single-mode fiber, ideal for high-speed, long-distance network connections.
Compare THT, SMT, and THR RJ45 connector mounting methods for strength, speed, cost, and best use in network and Ethernet applications.
QSFP28 100G BIDI modules enable 100G Ethernet over duplex LC fiber, offering bidirectional transmission, compact size, and simplified cabling.
Compare 100G SWDM4 and 100G SR4 to find the best fit for your data center—upgrade with duplex fiber or build new with ribbon fiber and MPO connectors.
Learn about the SFF-8432 specification, the mechanical standard for SFP+ modules and cages. Discover its role in EMI performance, durability, and interoperability.
Explore features, benefits, and use cases of SFP+ RJ45 10G modules. Learn how LINK-PP’s SFP+ RJ45 module delivers 10G up to 80 m over Cat6a/7 cables.
Compare 100g cwdm4 lr4 modules for single-mode fiber: CWDM4 suits short to medium links, LR4 excels at long-distance, high-reliability connections.
What the SFP-10G-LRM is, how it works, and its benefits. Learn why LINK-PP’s 10GBASE-LRM modules are ideal for upgrading older fiber networks with 220m reach ov
A 100G SWDM4 transceiver delivers 100Gbps over duplex multimode fiber using four wavelengths, enabling cost-effective high-speed network upgrades.
Learn the differences between 10GBASE-LR and 10GBASE-LRM transceivers, including distance, fiber type, and applications of LINK-PP 10G SFP+ modules.
Discover how RJ45 Magjacks enhance reliability, performance, and design efficiency in consumer electronics, from smart TVs to gaming consoles.
QSFP28 100G CWDM4 transceiver is the industry-standard solution for cost-effective, high-performance 100 Gigabit Ethernet connections over distances up to 2km
Virtual Extensible LAN enables scalable, secure, and flexible network virtualization, supporting millions of segments for modern data center needs.
Learn what an Intrusion Prevention System (IPS) is, how it works, key types, and deployment best practices. Enhance your IPS network with LINK-PP Ethernet components.
FBT splitter offers a cost-effective way to split optical signals in fiber networks, ideal for small setups needing simple, customizable signal distribution.
Learn how NAT (Network Address Translation) works, its types, benefits, limitations, and best practices for IPv6 and enterprise deployments.
An IPv4 address uniquely identifies your device on a network, enabling internet access and secure data transfer between devices worldwide.
Mean Time Between Failure (MTBF) shows how long equipment runs before failing, helping you plan maintenance and boost reliability.
Learn how LLDP (Link Layer Discovery Protocol) enhances PoE systems through intelligent power negotiation, efficient energy management, and device discovery in modern Ethernet networks.
Learn what a Powered Device (PD) is in PoE networks, how it receives power from a PSE, and explore LINK-PP’s PoE-ready components like LPJK6072AONL and LP41223NL.
Learn what Power Sourcing Equipment (PSE) is, how it works in PoE networks, and explore LINK-PP’s PoE-compatible RJ45 connectors and transformers.
A power budget shows how much energy your system needs, helping you plan, avoid overloads, and keep devices running reliably and efficiently.
Discover the LQ‑SW40‑SR4C 40GBASE‑SR module: high-speed, low-power, QSFP+ optics for multimode fibre networks. Perfect for data centres and network upgrades.
Learn what hyperconverged infrastructure HCI is, how it compares with virtualization and dHCI, and when Nutanix, Sangfor, or SFP-based designs fit best.
What an FC SFP module is, how it differs from Ethernet SFPs, which speeds and fiber types it supports, and how to choose the right one.
Learn the real difference between 1000base-lh and 1000base-lx, including wavelength, fiber compatibility, Cisco naming, and when to use each.
Learn what a Gigabit SFP transceiver is, compare 1000BASE-SX, LX, and T options, and solve common compatibility and setup issues with confidence.
Compare CFP4 vs. QSFP28 by size, power, density, and deployment fit. Learn which 100G module is better for data centers, telecom, and upgrades.
Learn what a 10/100/1000BASE-T SFP is, how RJ45 copper SFP modules work, compatibility issues, heat concerns, and best use cases in networks.
Explore the Netgear AGM731F datasheet with specs, LC connector, OM1/OM3/OM4 distances, compatibility, power use, and operating limits.
Understand SFP+ 40km (10GBASE-ER) modules, including specs, SMF compatibility, and how to choose the right extended-reach optical transceiver for your network.
Learn QSFP+ 40GBASE-LR4 specs, distance limits, compatibility tips, and buying advice. Avoid common deployment issues with this expert guide.
Subscribe to LINK-PP
newsletter
Don’t miss anything. Get all the latest posts delivered straight to your inbox.
Video
01:11
Global Delivery Service | LINK-PP
Jun 26, 2024
- 1.2k
- 888
